page_banner

products

Mineral Water Bottling Filling Machine

short description:

This Wash-filling-capping 3-in-1 unit can finish all the process such as bottle rinsing, filling and sealing fast and stable. the whole process is automatic, suitable for PET bottle, plastic bottle filling mineral water and pure water.Filling way using the gravity or micro pressure filling, make the speed is faster and more stable, so with the same model our machine output is higher and more efficient.The machine adopts advanced Mitsubishi programmable controller (PLC) to control the machine to run automatically, working with inverter running more stable and reliable.The photoelectric sensor detect all part running state, with high degree of automation, easy operation.

This is automatic water washing filling capping machine video 

 


Product Detail

Product Tags

Product Display

filling machine for water (2)
filling machine for water (1)
filling machine for water (4)

Overview

This washing filling capping machine is mainly used for Non-aerated carbon dioxide drink, such as mineral water, pure water and so on.The machine design is shorten the time for the drink material contact with outside, Increase the sanitation condition throughout economy benefit.

Product Details

Washing Part
Filling Part
Capping Part
Washing Part

1. Stainless steel 304/316L washing heads.

2. Using unique design,avoid the traditional bottle on rubber clip to block the bottle threaded parts may be caused by the pollution.

3. Washing pump is made of stainless steel.

4. By high spray nozzle, blunt bottle of water jet angles,flush to the bottle of any part of the inner wall, rinse with water thoroughly and save flush bottle.

5. Bottle clamp and flip agencies sliding sleeve adopts Germany igus corrosion resistant bearing without maintenance.

Filling Part

1. Filling method for gravity filling.

2. Filling valve manufactured SUS 304/316L.

3. High precision, high speed liquid filling.

4. Filling move by the rack drive system through gear transmission.

5. Hydraulic cylinder controlled by a float liquid level.

6. Using the latest double guide pillar type bottle of lifting mechanism, avoid the bottle of elevating the old products must be through the mesa caused by leakage on the edge, at the same time, easy installation and maintenance.

 

Capping Part

1.Automatic check,no bottle no capping.

2.Capping heads in stainless steel 304/316L.

3.Capping heads stop working when lack of bottle.

4.Fall guy guide sets out to prevent the cover through and cover on the body, at the same time equipped with a set of photoelectric switch, automatic stop when lighted cover rail without cover machine, can effectively avoid the occurrence of open bottle.

5.High efficiency centrifugal principle.

 

Parameters

Normal
SHPD 8-8-3
SHPD  14-12-4
SHPD 18-18-6
SHPD 24-24-8
SHPD 32-32-10
SHPD 40-40-12
Capacity bottle/500ml/hour
2000-3000
3000-4000
6000-8000
8000-10000
12000-15000
16000-18000
Floor Area
300m2
400m2
600m2
1000m2
2000m2
2500m2
Total Power
100KVA
100KVA
200KVA
300KVA
450KVA
500KVA
Workers
8
8
6
6
6
6

Machine configuration

Frame

SUS304 Stainless steel

Parts in contact with liquid

SUS316L Stainless steel

Electrical parts

 图片1

Pneumatic part

图片2

Shanghai Panda Intelligent Machinery Co., Ltd. is a comprehensive enterprise specialized in the design, manufacture, R&D, trade of filling equipment and packaging equipment.

Click this picture to see our factory information


  • Previous:
  • Next:

  • Write your message here and send it to us