Personlized Products Water Bottling Line - Small Bottle Full Automatic Water Filling Machine for Pet Bottle – Ipanda

Product Display

Overview

This washing filling capping machine is mainly used for Non-aerated carbon dioxide drink, such as mineral water, pure water and so on.The machine design is shorten the time for the drink material contact with outside, Increase the sanitation condition throughout economy benefit.

Product Details

Washing Part
Filling Part
Capping Part
Washing Part

1. Stainless steel 304/316L washing heads.

2. Using unique design,avoid the traditional bottle on rubber clip to block the bottle threaded parts may be caused by the pollution.

3. Washing pump is made of stainless steel.

4. By high spray nozzle, blunt bottle of water jet angles,flush to the bottle of any part of the inner wall, rinse with water thoroughly and save flush bottle.

5. Bottle clamp and flip agencies sliding sleeve adopts Germany igus corrosion resistant bearing without maintenance.

Filling Part

1. Filling method for gravity filling.

2. Filling valve manufactured SUS 304/316L.

3. High precision, high speed liquid filling.

4. Filling move by the rack drive system through gear transmission.

5. Hydraulic cylinder controlled by a float liquid level.

6. Using the latest double guide pillar type bottle of lifting mechanism, avoid the bottle of elevating the old products must be through the mesa caused by leakage on the edge, at the same time, easy installation and maintenance.

Capping Part

1.Automatic check,no bottle no capping.

2.Capping heads in stainless steel 304/316L.

3.Capping heads stop working when lack of bottle.

4.Fall guy guide sets out to prevent the cover through and cover on the body, at the same time equipped with a set of photoelectric switch, automatic stop when lighted cover rail without cover machine, can effectively avoid the occurrence of open bottle.

5.High efficiency centrifugal principle.

Parameters

Machine configuration

Frame	SUS304 Stainless steel
Parts in contact with liquid	SUS316L Stainless steel
Electrical parts
Pneumatic part

Shanghai Panda Intelligent Machinery Co., Ltd. is a comprehensive enterprise specialized in the design, manufacture, R&D, trade of filling equipment and packaging equipment.

Click this picture to see our factory information